Polisher Service Kit Main Roller Comp.(50-59/69-75) For My3025-1

Features

• Genuine Tork Craft spare kit main roller components for the MY3025-1 tube belt sander/polisher.
• Covers components 50–59 and 69–75 as shown on the official MY3025-1 exploded parts diagram.
• Factory-shaped main roller section designed to wrap the sanding belt smoothly around tube and pipe.
• Correct bores, bushes and fixings to fit directly into the existing roller arm and brackets.

Benefits

• Smoother belt support: a fresh main roller group helps the belt run true with less chatter.
• Better surface finish: even contact around the tube reduces stripes, flat spots and uneven polishing marks.
• Reduced wear on the machine: a stable, properly supported belt path lowers vibration and strain on the drive system.

Extra Information

• Designed for the Tork Craft MY3025-1 tube belt sander/polisher – always confirm the model number on the rating plate.
• Ideal replacement when the main roller shows grooves, flat spots, cracks or excessive play on the shaft.
• Best fitted together with a check of the secondary rollers, belt tensioning system and drive components for a full belt-path service.

Specifications

Safety

• Disconnect the tube belt sander/polisher from the mains and allow all moving parts to stop before working on the roller assembly.
• Check that all roller fasteners, spacers and guards are fitted correctly before running the machine.
• After reassembly, run the tool at low speed to confirm that the belt tracks freely and does not rub against guards or brackets.
• If you are not confident servicing power tools, have the MY3025-1-SK16 kit fitted by a qualified technician.